D-Greeze™ 500-LO is a non-hazardous degreaser cleaner that dissolves and removes wax binders from injection molded metal parts. A safe alternative to chlorinated solvents, D-Greeze 500-LO offers low cost, room temperature immersion tank debinding of injection molded metal parts in preparation for sintering.
Placing parts in an immersion tank containing the D-Greeze solution enables wax binders to be broken down, emulsified and easily removed. This process makes it possible to reach difficult-to-remove wax binders including those deep under the surface and those contained in hard-to-reach geometries such as blind holes, narrow orifices and complex part geometries. Low surface tension enables fast blow-off drying of parts upon removal from the tank.