Early Innovation
This
year, Reichhold is celebrating the company’s 80th anniversary, as it
was founded in 1927. While working for the paint division of the Ford Motor
Company, Henry Reichhold imported some specialty resins for coatings
applications from his family’s Vienna-based company, Beck, Koller & Co. to demonstrate the
possibility of improved performance in automotive coatings.
In
those days, a major stumbling block in the mass production of automobiles was
the lengthy drying times associated with the primitive automotive paints and
painting processes – times as long as several weeks! As head of the automaker’s
paint division, Henry Reichhold was approached by Henry Ford in 1925. Ford
asked Reichhold if he had any ideas on how to speed up the drying process, and
how they might introduce new colors to Ford automobiles.
Using resins imported from Beck, Koller & Co., Henry Reichhold was able to
reduce the drying time for paint on Ford’s Model T from weeks to mere hours.
The new resins vastly improved the final body finish as well. This allowed Ford
to increase the speed of its assembly line and the amount of cars it could produce
for the masses. Henry Reichhold’s work also enabled the introduction of colors
other than black (the only one available at the time) for Ford
automobiles.
Reichhold Growth
 |
| John
Gaither |
|
Two years later, Henry Reichhold left Ford and
acquired facilities in Ferndale, MI, creating a coating resins company that
would grow into Reichhold Chemicals, Inc., now known simply as
Reichhold, Inc.
Over
the past 80 years, Reichhold has grown from one man’s vision into a global
supplier to the coatings and composites industries. Through both organic growth
and acquisitions, Reichhold has established itself as a leading supplier of
resins and other polymers to many of the world’s leading coatings formulators.
From large corporations to smaller, regional manufacturers, Reichhold supplies
a wide variety of chemistries for practically every coatings application in the
marketplace.
From 1987 to 2005, Reichhold was a subsidiary of Tokyo-based Dainippon Ink and
Chemicals (DIC). In 2004, Reichhold
former senior executive John Gaither approached DIC in a bid to purchase the
company he had served for more than 30 years. DIC declined to sell in 2004, but
asked Gaither to return to Reichhold and lead the company, in an effort to turn
around sagging profits.
Management Buyout
 |
| Rodney Biddle |
|
After
a year on the job, Gaither and five other senior executives led a successful
effort to purchase Reichhold from DIC in a deal that closed in September 2005.
“The management buyout (MBO) of Reichhold by veteran executives has been very
positive for both Reichhold and DIC,” says Reichhold Chairman, President and
CEO John Gaither.
Gaither is quick to point out that his team
did not buy Reichhold only to “flip” the company for a quick profit, something
that they could have done quite easily. “We acquired 100 percent of the company
in the deal,” Gaither explains. “And, as I’ve said repeatedly to employees,
customers and suppliers, we are not an equity fund looking for a quick exit
from this business.”
“On the contrary, it is our common
goal within the ownership team to create value over the long term for customers
and owners,” Gaither says. Fellow owner and Senior Vice President, Global
Coatings, Rodney Biddle echoes Gaither’s thoughts. “I just celebrated my 40th
anniversary with Reichhold,” Biddle says. “My first retirement was in 2002, but
I jumped at the opportunity to return to Reichhold working with John and our
fellow executive team members, and to be an owner of the company where I’ve
worked for decades.”
Biddle points out that Reichhold is a company where you can work your
way from the ground floor all the way to the top. And he should know. Biddle
began his Reichhold career right out of high school as a “yard utility man,” in
a job where he cleaned out trucks, railcars and tanks.
He later moved into the company’s laboratory operations and began his secondary
education, eventually earning a bachelor’s degree and later an MBA, all the
while progressing through the ranks at Reichhold. This progression put Biddle
on a path to leading the company’s North American coatings business. He now
serves as both senior vice president for global coatings and is a company
owner.
Gaither and Biddle are joined on the
Reichhold management team by Doug Frey, executive vice president, global
composites; Bill Branson, senior vice president, operations and supply
chain; Mitzi Van Leeuwen, senior vice president, corporate services; and Roger
Willis, chief financial officer and treasurer.
Combined,
Reichhold’s ownership has over 135 years of experience between them. Even
before the team finalized its ownership of the company, there were a number of
basic issues to address before Reichhold was put back on the road to success.
“The difference in our approach has been to make sure that everyone at
Reichhold is focused on the basics, and doing them well,” Gaither
explains.
“As Reichhold previously went through reorganization after reorganization, we
often had leadership that had little or no knowledge of the primary markets we
serve (coatings and composites),” he says.
Gaither says his team has worked hard to improve productivity at its plants in
recent years. “Our previous owner, DIC, invested a great deal in Reichhold’s
plants, but often failed to implement the final, small changes that could make
a real difference. That’s one of the first things we worked on.”
At the same time plant optimization was taking place, Reichhold management
placed a strong emphasis on the basics. “You cannot be successful in any
industry if you can’t provide products on-time, in-spec and at competitive
prices,” Biddle says. “We’ve made it a top priority to excel at these basics so
our coatings industry customers know beyond a doubt that they can count on
Reichhold to do what we say we’ll do and to live up to our promises.”
Once the company was able to shore up the basics, it was then able to focus on
not only growing its share of existing businesses, but developing products that
will take Reichhold and Reichhold’s customers into new and untapped markets and
applications.
“Customers now understand that Reichhold is here to stay,” Gaither points out.
“I believe they understand that a transformation has occurred in all functional
areas at Reichhold over the past two and a half years,” he
continued.
“When we returned to Reichhold (in 2004), the company had a lot of practices
that frankly didn’t make a lot of sense,” Gaither continues. But, the criteria
for any process at a customer-centric company should always be that those
processes focus first on the needs of customers. That’s pretty basic, but it’s
not a universally followed practice.
Many corporations hire consultants to spend
exhaustive periods with their personnel to develop company values and mission
statements, a practice Gaither views with quite a bit of skepticism. “You
shouldn’t have to hire a consultant to tell you what your values are,” he
explains. “So, I’ve kept Reichhold’s values pretty simple, fitting into three
bullet points at its bare minimum,” he explains. “We believe a company’s values
should be simple, easy to understand, and the basis for how business is done,
every day.”
“First, we will operate ethically and legally. Ensuring that a company
and its representatives operate in a legal and ethical fashion should be a
given value, but we choose to highlight the importance of both in an era when
some companies try to draw sharp distinctions between what is legal and what is
ethical,” Gaither says.
“Secondly, we
will create value for our customers,” he continues. “Reichhold achieves success only
when our customers succeed. We strive to create value for customers through
innovative products, unmatched customer service and value-added services that
all combine to give our customers the tools they need for success in the
markets they serve.”
“And finally, we will keep the company intact,” Gaither explains. “When
we acquired Reichhold in 2005, our goals were, and continue to be long-range in
scope, with the idea of keeping the company together by strengthening its
foundation.”
Technological Innovation Today
 |
| Reichhold Headquarters |
|
It
has been nearly 18 months since the management buyout, and Reichhold continues
to establish itself as an industry leader and solutions provider for coatings
manufacturers, according to Business Director Tony Rende.
“Reichhold continues to invest heavily in new technologies and introduced a
variety of new products in 2006 to help coatings formulators meet ever-changing
market conditions and VOC regulations,” Rende explains. “These include exempt,
solvent-cut alkyds for industrial finishes, sold under the BECKOSOL®
brand, water and lower-VOC, solventborne UROTUF® polyurethanes for
floor finishes as well as patented waterborne EPOTUF® epoxy curing
agents for industrial maintenance applications. We’ve also broadened our line
of VOC-compliant acrylic polyols for two-component urethane finishes,” Rende
continues.
“Reichhold is one of only a few companies
that actively develops products across a wide range of technologies,” Rende
says. “This gives us the opportunity to develop products that really fit the
customers’ market needs and manufacturing processes. In 2007, we expect to
introduce even more new products that will have significant impact on our
customers’ ability to meet even the most stringent regulations.”
Technology Director Dr. Carl Sullivan
points out that Reichhold recently introduced a new water-based epoxy coating
for metal surfaces. “This is one of the first products of its type in the
industry as part of Reichhold’s efforts to leverage our core technology
competency and provide customers with environmentally friendly products,”
Sullivan says.
Reichhold’s patented technology provides the corrosion protection of
solventborne coatings through waterborne chemistry. Coatings based on this new
curing agent and Reichhold’s epoxy resin aqueous dispersion perform well on
metal substrates, providing excellent corrosion resistance equivalent to many
solventborne systems, but at lower VOC levels.
Sullivan says Reichhold has also developed an innovative emulsion polymer for coating
polypropylene plastic. “This product simplifies the coating process by
eliminating the need for primer coats or surface treatment while maintaining
excellent adhesion to the substrate,” he explains.
“Reichhold has come a long way since its beginnings in 1927,” says Randall
Vasseur, North American director of
sales (coatings). “The fact that we are still around today says a lot about
Reichhold as a company, especially in today’s business world.”
“The management buyout has only strengthened our position as a leader in the
markets we serve,” Vasseur continues. “The management team has brought
stability and confidence to the company and also to the market place. Reichhold
continues to invest heavily in its sales organization. The pressure to succeed
in today’s business world has never been greater, and we are up to these
challenges,” Vasseur explains.
“Our focus is in developing a sales force
with the necessary skill sets to meet the demands of our customers and the
ever-changing markets we serve,” he says. “We will create value for our
customers, both in the short- and long-term scheme of things. It’s a win/win
situation for both,” Vasseur concludes.
From faster-drying paint for the Ford
Model T, to helping customers meet VOC regulations in 2007, Reichhold’s focus
has remained the same: provide products that deliver solutions for customers.
For more information on Reichhold and its products for the coatings industry,
visit www.Reichhold.com or call 800/431.1920.
