New Products

RSS

 The new Kinexus pro+ and Kinexus ultra+ extend the range and robustness of test conditions that can be applied during rheological characterization.  

 AireStream fume hoods are constructed entirely of chemical-resistant, flame-retardant, non-metallic composite resin materials. 

 These 30-gallon, dished-bottom reactors are equipped with a top-entering impeller agitator, dip tube, multiple feed ports, removable thermowell and flush bottom ball valve, and are designed for 100 psig internal pressure at 200 °F.  

 ADDITOL® XL 6557 is a polymeric, multifunctional universal grinding medium designed to efficiently disperse, stabilize and transport organic and inorganic pigments in non-aqueous industrial coatings. 

 ADM CA118 coalescent is a biobased ingredient that can replace traditional coalescing solvents and lower overall VOC content in coatings. 

This floor-level cabinet oven for curing coatings has a maximum operating temperature of 350 °F and workspace dimensions of 36” wide x 36” deep x 60” high.

 PASSON is a high-shear mixer that can disperse high-viscosity materials in only one pass (no dead zone), improving product quality and productivity. 

 The Ross Interfacial Surface Generator (ISG) is designed for laminar flow processes such as blending a minor component into a viscous stream. 

 RheocalcT software provides fully automated viscosity testing from a dedicated PC when using the new DV3T touch screen rheometer and the new DV2T touch screen viscometer.  

 Synaqua® 4804 waterborne alkyd is an APEO- and ammonia-free short oil alkyd emulsion designed for use in a variety of coatings in which performance similar to solvent-based alkyds is desired.