Can a steel powder-coated insert work inside pressure-treated lumber?The ChemQuest Group’s Joe Powder shares his powder coating knowledge and expertise by answering questions sent in from around the world.
What is the best respiratory mask to be used during powder coating application? The ChemQuest Group’s Joe Powder shares his powder coating knowledge and expertise by answering questions sent in from around the world.
Is there a particle size that would lend itself to consistency of film thickness on wire assemblies? Can an e-coated vehicle shell be shipped overseas and painted at the destination?The ChemQuest Group’s Joe Powder shares his powder coating knowledge and expertise by answering questions sent in from around the world.
Is moisture an important measurement in the manufacturing of powder coatings? What is the best way to degrease steel and aluminum prior to powder coating? Joe Powder, aka Kevin Biller of ChemQuest Powder Coating Research, shares his powder coating knowledge and expertise by answering questions like these sent in from around the world.
We currently use a "midnight black” wrinkle powder coating supplied by a major powder producer. Can a second touchup coat be applied after the first coat has cured? Read the answer to this question and more in this edition of Ask Joe Powder.
Joe Powder, aka Kevin Biller of ChemQuest Powder Coating Research, shares his powder coating knowledge and expertise by answering questions sent in from around the world.
A reader from Vietnam asks Joe if there is a way to reduce the hardness of powder coatings. She is using a polyester resin for a powder coating with a pencil hardness of 3H. However, her customer requires 1H hardness.
I have a technical question to ask. I hope you have the answer. I read some non-technical articles mentioning powder coatings used on wood. How is this possible when wood is a non-magnetic material?
What are your powder coating questions and challenges? Joe Powder shares his powder coating knowledge and expertise by answering questions sent in from around the world.
I am new to powder coating technology. I was reading an on-line article on polyester powder coatings, and I see your name is mentioned in the article. My question is: Is TGIC powder coating safe?
RSS
