The EPL-48-2L-LED-D explosion-proof LED light fixture from Larson Electronics is ideal for operators seeking top-quality lighting that will reduce operating costs, improve lighting quality and decrease downtime incurred from frequent servicing intervals. This fixture is equipped with two f specially designed dimmable LEDT-series bulbs that produce 2,875 lumens per bulb. The dimmable 23 watt LED lamps produce 125 lumens per watt, offer lower amp draw and increased reliability. They work with standard 0-10 dimming controllers and have been tested on Lutron and Leviton electronic dimmers. The LED assembly is mounted within a tube constructed from extruded aluminum and a polycarbonate lens. The solid-state design of light-emitting diodes provides a more reliable, stable and energy efficient light source over traditional fluorescent lighting.

This fixture carries a T6 temperature rating and is approved for Class 1 Division 1 Groups C and D, Class 1 Division 2 Groups A, B, C, and D environments where flammable or combustible gases, vapors, dusts, fibers and flying exist or may potentially exist. This unit is voltage specific and operates on 120 volts AC or 277 volts AC. These fixtures are standard surface mounted via two swivel brackets.