There are currently two dominant trends in the automotive industry: electric mobility and personalized vehicles. Dürr’s EcoPaintJet system for fully automatic car painting in two colors – without masking or overspray – is a perfect fit for this. The system has a number of benefits: it can be integrated into the painting line in new plants or added to existing plants as an additional module. The decorative coating can be applied to the already cured clear coat or following intermediate drying. The only small restriction is that the system can only process plain color paints at the moment, and no metallic paints. This is due to the applicator, the central element in the system. It is fitted with a nozzle plate on the underside. This plate has around 50 barely visible holes with a diameter of around one tenth of a millimeter. The paint is applied through these holes in parallel streams onto the body panels from a distance of 30 mm. This makes it possible for the paint to be applied with very high precision and absolutely no overspray.
When it comes to painting the roof of a vehicle, the challenge is that the surface is curved and non-rectangular. In addition, the bodies are not always in exactly the same place for painting. The EcoPaintJet system therefore measures the surface to be painted before every application using a two-stage measuring system in order to calculate body and positioning tolerances, and tailor the painting paths and paint application to them fully automatically. To this end, the system obtains basic information such as 3D body data and specifications for the robot paths offline. The corresponding software then corrects the measured deviations online to ensure custom guidance of the applicator. For example, it regulates the width of the paint application through appropriate horizontal rotation of the nozzle head, adapts the traversing speed to the degree of rotation – to keep the coat thickness constant – and tilts the application as appropriate to the slope of the roof.