The Dynatrol® G Series Level Detectors are designed for high-, intermediate- or low-point level detection of bulk solids. They are constructed to handle extremely light to heavy bulk solids in the density range of <0.5 lbs/ft3to greater than 60 lbs/ft3. They provide accurate and consistent results on powders, powder coatings, fine titanium dioxide powder, polyester powders, dry polymer powders, and fine, low-density powders or fluff. Each Dynatrol unit is factory calibrated with no field calibration needed. Specialized units can be used in temperatures exceeding 300 °F.
Bulk Solids Level Detectors from Automation Products Inc.
September 1, 2021