Walmec Offers .01 Micron Filter
Courtesy of Walmec.
Walmec’s .01 Micron SuperStar Filter is designed to provide clean, dry, compressed air resulting in the removal of any vapors and contaminants down to .01 micron. According to Walmec North America, the .01 Micron SuperStar Filter is a four-stage filtration system that has a .01 micron rating, with flow ranges of 50 SCFM, 75 SCFM, or 100 SCFM, and can handle pressure ratings of up to 250 PSI. The .01 Micron SuperStar Filter works best when it is installed at, or near the point of use.
The first and second stage filters remove moisture, liquids, dust, rust, scale, and other contaminants to 5 microns. An automatic float drain under the second-stage filter opens and expels all collected liquids whenever an ounce or more is present. It is fully automatic with no continuous air loss. The third and fourth stages remove any remaining particles down to .01 microns as well as absorbing any remaining vapors.
The filter includes a differential pressure gauge and comes with mounting brackets. The differential pressure gauge provides a visual indication of required maintenance, which is easily done by installing the appropriate service kit. No need to remove the unit from the compressed air system. The .01 Micron SuperStar Filter is a solution for applications that require the highest standard of compressed air.
For more information, visit: www.walmecna.com.
Looking for a reprint of this article?
From high-res PDFs to custom plaques, order your copy today!
