OSHA Hazard Communication Deadline Takes Effect for Substances

A new employer compliance deadline under OSHA’s updated Hazard Communication Standard took effect Nov. 20.
Employers using chemical substances must update alternative workplace labeling, their written hazard communication program and employee training as necessary when revised hazard information identifies newly recognized risks.
The requirement follows OSHA’s 2024 update to the standard and a later four-month extension of the phased compliance schedule.
What Employers Need to Review
The Nov. 20 deadline does not necessarily require every employer to replace every label or retrain every employee.
Instead, employers should determine whether updated labels or safety data sheets from manufacturers, importers and distributors identify new physical hazards, health hazards or other hazards covered by the standard.
Where new information applies, employers may need to:
- Update workplace container labels or other alternative labeling.
- Revise the written hazard communication program.
- Provide additional employee training.
- Confirm that employees can access current safety data sheets.
- Review chemical inventories and work practices against the revised hazard classifications.
For coatings manufacturers, this process may involve raw materials such as solvents, resins, pigments, additives, crosslinkers and cleaning chemicals.
Phased Schedule Continues for Mixtures
Chemical manufacturers, importers and distributors evaluating substances had a May 19, 2026, deadline to update labels and safety data sheets.
The next major phase applies to mixtures. Manufacturers, importers and distributors must update mixture classifications, labels and safety data sheets by Nov. 19, 2027.
Employers using mixtures then have until May 19, 2028, to update workplace labels, written programs and training as necessary.
During the transition period, regulated parties may comply with the updated standard, the previous standard or both, subject to the conditions in OSHA’s rule.
The phased schedule is intended to allow updated hazard information to move through the supply chain before downstream employers complete their own workplace changes.
Sources: OSHA
Follow PCI’s coverage of chemical labeling, safety data requirements and regulations affecting coatings manufacturing.
Looking for a reprint of this article?
From high-res PDFs to custom plaques, order your copy today!



