UMass Team Creates Biomass Alternative to Petroleum Production
AMHERST, MA - A research team from the UMass Amherst Chemical Engineering department reports in the November 26 issue of Science that it has developed a way to produce high-volume chemical feedstocks, including benzene, toluene, xylenes and olefins, from pyrolytic bio-oils, the cheapest liquid fuels available today derived from biomass. As George Huber, the Armstrong Associate Professor in the Chemical Engineering Department at UMass Amherst, explained, "Thanks to this breakthrough, we can meet the need to make commodity chemical feedstocks entirely through processing pyrolysis oils. We are making the same molecules from biomass that are currently being produced from petroleum, with no infrastructure changes required."
The new process could reduce or eliminate industry’s reliance on fossil fuels to make industrial chemicals worth an estimated $400 billion annually. Instead of buying petroleum by the barrel, chemical manufacturers will now be able to use relatively cheaper, widely available pyrolysis oils made from waste wood, agricultural waste and non-food energy crops to produce the same high-value materials for making everything from solvents and detergents to plastics and fibers.
"We think this technology will provide a big boost to the economy because pyrolysis oils are commercially available now,” explained Huber. “The major difference between our approach and the current method is the feedstock; our process uses a renewable feedstock, that is, plant biomass. Rather than purchasing petroleum to make these chemicals, we use pyrolysis oils made from non-food agricultural crops and woody biomass grown domestically. This will also provide United States farmers and landowners a large additional revenue stream.”
In the past, these compounds were made in a low-yield process, the chemical engineer adds. “But here we show how to achieve three times higher yields of chemicals from pyrolysis oil than ever achieved before. We’ve essentially provided a roadmap for converting low-value pyrolysis oils into products with a higher value than transportation fuels.”
In the paper, he and doctoral students Tushar Vispute, Aimaro Sanno and Huiyan Zhang show how to make olefins such as ethylene and propylene, the building blocks of many plastics and resins, plus aromatics such as benzene, toluene and xylenes found in dyes, plastics and polyurethane, from biomass-based pyrolysis oils. They use a two-step, integrated catalytic approach starting with a "tunable", variable-reaction hydrogenation stage followed by a second, zeolite catalytic step. The zeolite catalyst has the proper pore structure and active sites to convert biomass-based molecules into aromatic hydrocarbons and olefins.
Huber, Vispute and colleagues discuss how to choose among three options, including low- and high-temperature hydrogenation steps, as well as the zeolite conversion for optimal results. Their findings indicate “the olefin-to-aromatic ratio and the types of olefins and aromatics produced can be adjusted according to market demand.” That is, using the new techniques, chemical producers can manage the carbon content from biomass they need, as well as hydrogen amounts. Huber and colleagues provide economic calculations for determining the optimal mix of hydrogen and pyrolytic oils, depending on market prices, to yield the highest-grade product at the lowest cost.
A pilot plant on the UMass Amherst campus is now producing these chemicals on a liter-quantity scale using this new method. The technology has been licensed to Anellotech Corp., co-founded by Huber and David Sudolsky of New York City. Anellotech is also developing UMass Amherst technology invented by the Huber research team to convert solid biomass directly into chemicals. Thus, pyrolysis oil represents a second renewable feedstock for Anellotech.
Sudolsky, Anellotech’s CEO, said, "There are several companies developing technology to produce pyrolysis oil from biomass. The problem has been that pyrolysis oils must be upgraded to be useable. But with the new UMass Amherst process, Anellotech can now convert these pyrolysis oils into valuable chemicals at higher efficiency and with very attractive economics. This is very exciting."
The new process could reduce or eliminate industry’s reliance on fossil fuels to make industrial chemicals worth an estimated $400 billion annually. Instead of buying petroleum by the barrel, chemical manufacturers will now be able to use relatively cheaper, widely available pyrolysis oils made from waste wood, agricultural waste and non-food energy crops to produce the same high-value materials for making everything from solvents and detergents to plastics and fibers.
"We think this technology will provide a big boost to the economy because pyrolysis oils are commercially available now,” explained Huber. “The major difference between our approach and the current method is the feedstock; our process uses a renewable feedstock, that is, plant biomass. Rather than purchasing petroleum to make these chemicals, we use pyrolysis oils made from non-food agricultural crops and woody biomass grown domestically. This will also provide United States farmers and landowners a large additional revenue stream.”
In the past, these compounds were made in a low-yield process, the chemical engineer adds. “But here we show how to achieve three times higher yields of chemicals from pyrolysis oil than ever achieved before. We’ve essentially provided a roadmap for converting low-value pyrolysis oils into products with a higher value than transportation fuels.”
In the paper, he and doctoral students Tushar Vispute, Aimaro Sanno and Huiyan Zhang show how to make olefins such as ethylene and propylene, the building blocks of many plastics and resins, plus aromatics such as benzene, toluene and xylenes found in dyes, plastics and polyurethane, from biomass-based pyrolysis oils. They use a two-step, integrated catalytic approach starting with a "tunable", variable-reaction hydrogenation stage followed by a second, zeolite catalytic step. The zeolite catalyst has the proper pore structure and active sites to convert biomass-based molecules into aromatic hydrocarbons and olefins.
Huber, Vispute and colleagues discuss how to choose among three options, including low- and high-temperature hydrogenation steps, as well as the zeolite conversion for optimal results. Their findings indicate “the olefin-to-aromatic ratio and the types of olefins and aromatics produced can be adjusted according to market demand.” That is, using the new techniques, chemical producers can manage the carbon content from biomass they need, as well as hydrogen amounts. Huber and colleagues provide economic calculations for determining the optimal mix of hydrogen and pyrolytic oils, depending on market prices, to yield the highest-grade product at the lowest cost.
A pilot plant on the UMass Amherst campus is now producing these chemicals on a liter-quantity scale using this new method. The technology has been licensed to Anellotech Corp., co-founded by Huber and David Sudolsky of New York City. Anellotech is also developing UMass Amherst technology invented by the Huber research team to convert solid biomass directly into chemicals. Thus, pyrolysis oil represents a second renewable feedstock for Anellotech.
Sudolsky, Anellotech’s CEO, said, "There are several companies developing technology to produce pyrolysis oil from biomass. The problem has been that pyrolysis oils must be upgraded to be useable. But with the new UMass Amherst process, Anellotech can now convert these pyrolysis oils into valuable chemicals at higher efficiency and with very attractive economics. This is very exciting."
Looking for a reprint of this article?
From high-res PDFs to custom plaques, order your copy today!
