The seacoast warranty applies only to Duranar coatings products that are properly factory-applied. The aluminum substrates to which coatings are applied must be properly cleaned and primed, and they must use PPG's proven flash primer technology along with the specified pre-treatment. If these conditions are met, the warranty asserts that Duranar coatings:
- Will not peel, check or crack
- Will not chalk in excess of numerical rating 8, as measured by ASTM D4214 procedures (Method D659)
- Will not fade or change color in excess of five DE units, as measured by ASTM D2244
- Will not corrode in excess of numerical rating 6 on cut edges and numerical rating 7 on field surfaces, as measured using ASTM D1654 procedures.
For more information, visitwww.ppgideascapes.comor call 888.PPG.IDEA.
Report Abusive Comment