Guyson Corp. has upgraded its Orbit 800 rotary table parts washer to incorporate expanded cleaning process capabilities and a convenient touch-screen control panel. The washer has a standard 750-pound-capacity stainless steel wire mesh basket that is 5” deep and 31.5” in diameter at a loading height of 31”.
Guyson Corp. has upgraded its Orbit 800 rotary table parts washer to incorporate expanded cleaning process capabilities and a convenient touch-screen control panel. The washer has a standard 750-pound-capacity stainless steel wire mesh basket that is 5” deep and 31.5” in diameter at a loading height of 31”. Surrounding the gearmotor-driven rotary table on three sides are spray bars, each with an array of V-spray jets to ensure strong impingement of cleaning solution on the top, bottom and sides of components loaded in the slowly revolving basket.
A thermostat-controlled 12 kW electric immersion heater maintains the aqueous cleaning solution at the desired temperature up to a maximum of approximately 180°F (80°C). The standard 2 hp vertical seal-less pump delivers up to 50 gallons of solution per minute at a line pressure of 40 psi.
Single or dual in-line cartridge or bag-type filters remove particulates from the recirculating wash solution before it enters the spray bars. Solid contaminants such as chips and debris are removed from the fluid as it returns to the wash tank by a strainer basket located below the process chamber.
When cleaning requirements include rinsing, pneumatically operated valves are installed to block the return of liquid to the wash tank and allow rinse water to be diverted to drain, to a heated recirculated rinse tank or to a centralized water recycling system. After a brief draining period at the end of the wash cycle, which may be promoted by air blow-off, the diverter valves are actuated and the timed spray rinse cycle starts. Drying of components at the end of the cycle can be accelerated by air knife delivery of compressed air at ambient temperature, turbo-blown air or heated air, as the table continues to rotate.
A compact touch-screen panel replaces numerous separate buttons, dials and lights with a streamlined and simplified interface. Numeric data such as solution temperature or remaining cycle time, as well as text information and prompts are graphically shown in a logically organized hierarchy of customized display screens.
The overall footprint of the parts washer is 54" wide by 66" deep (137 x 168 cm).
For more information, call 518.587.7894 or visitwww.guyson.com.