When this new diacid is used as the system crosslinker in GMA powder powder coatings, the resultant coating has twice the impact resistance as that of the incumbent diacid.
Ceramic microspheres and glass bubbles may offer formulators cost-effective options for formulation of high solids coatings, including 2K epoxy systems.
Excellent clarity through control of the particle size and balance of flow and leveling through thixotropic behavior can be achieved with these rheology control agents.
For yellow pigments, CTAC chemistries have been found to be most effective at the lowest doses (0.1% or less) because they don’t work solely on formaldehyde-based killing.
Additives belong to a broad and diffuse category of key components in a coating formulation. The following is a brief description of many coating additives, along with some examples.
Mixture design is a type of DOE that takes advantage of the fact that the proportions of the ingredients of a mixture must add up to 100% to reduce the number of experimental runs required to evaluate the design space.