New Products

RSS

The EZFlow 2040 is a volumetric infusion syringe pump designed to enhance operation while maintaining simplicity.

The ACTEGA Rhenania range of adhesives are characterized by high content of polyols based on renewable raw materials that can be cured, preferably by aliphatic polyisocyanates.

DSX 3291 is an associative thickener for “green,” water-based architectural coatings. It is an excellent pseudo-plastic viscosity builder that is up to five times more efficient than conventional associative thickener products.

The ViscSense® viscosity control system features an intuitive touch screen controller and employs a compact acoustic wave sensor that can be installed to continuously monitor viscosity and temperature.

A new vinyl acetate/ethylene (VAE) emulsion, Mowilith® LDM 1865 is designed to offer a low-VOC alternative for exterior paints and plasters currently formulated with styrene acrylic, pure acrylic and vinyl versatate emulsions.

The 42NSD ribbon blender features a discharge screw positioned across the entire length of the trough that is powered by a separate direct drive system for independent speed control.

The 309 Delta T Hygrometer is a low-cost, entry-level gauge that provides a simple and fast method of measuring Delta T and relative humidity.

The UVAL product line of chemically stabilized leafing and non-leafing aluminum flakes can be used in one-component metallic UV inks and coatings.

NeoRez® U-430 is a mono-solvent-based urethane resin for flexible packaging in gravure inks.

SEMICOSIL® UV is a room-temperature-curing silicone rubber that only crosslinks after irradiation with UV light.