Paint & Coatings Industry Top Stories

RSS

Although CBPC coatings are relatively new in mine, quarry and aggregate processing applications, their use will only grow as word spreads about how they can inhibit carbon steel hopper and structural corrosion for decades as well as reduce premature maintenance and replacement.

Binders that show a high contact angle both before and after the salt spray test perform better for corrosion protection, compared to those that show low contact angles before and after the test.

This study has shown that DMMOPA has a unique combination of balanced physical properties. These physical properties offered DMMOPA-neutralized paints a multitude of performance advantages in a variety of waterborne paint systems as discussed in this article, such as enhanced hardness and solvent resistance in polyol-MF baking coatings, as well as better gloss, scrub resistance, water resistance and corrosion resistance in latex paints.

Greater awareness of phenomena that occur on a nanometric scale and subsequent testing (both in application and synthesis of polymers) have led to the development of new materials with better performance characteristics than the traditional ones, with full respect for the environment.

The results of this study can offer significant performance gains in formulating high-solids, high-build epoxy coatings. This is particularly important in regions where VOC emissions must be reduced significantly.

Functional coatings are an exciting and viable means to remove indoor air contaminants due to the significant surface area that walls, ceilings, doors and floors provide as a "vehicle" to degrade VOCs.

Kevin Biller combines his love of food and cooking with his years of knowledge in researching, developing and testing powder coatings.

This article was prepared in an effort to assist in this decision-making process and to help end users understand the newer technology and to know the common differences between the traditional three-layer coating system and the latest polyurethane coating technology.

Teflon and other functional coatings from an experienced applicator can solve design problems including excessive wear, sticking, noise and corrosion.

Recently introduced industrial chiller systems incorporate a significant series of hardware, software, material usage and design improvements. The combination of improvements in each of these domains has led to a significant overall performance improvement for this type of equipment.