BMW Group Selects BASF Automotive Coatings with Renewable Raw Materials

Image of the e-coat process at the BMW Leipzig plant

The e-coat at the BMW Leipzig plant is based on biomass and contributes to the reduction of CO₂ emissions. (Photo: BMW Group)

MUENSTER, Germany — BASF recently reported that the BMW Group is the first carmaker to place its trust in more sustainable automotive OEM coatings certified according to BASF’s biomass balance approach. The BMW Group has chosen to use BASF Coatings’ CathoGuard^® 800 ReSource e-coat at its plants in Leipzig, Germany, and Rosslyn, South Africa, and the iGloss^® matt ReSource clearcoat throughout Europe. Using these more sustainable product versions for vehicle coatings enables CO₂ avoidance of around 40% per coating layer, which will reduce the amount of CO₂ emitted in the plants by more than 15,000 metric tons by 2030.

“As the largest provider of chemical products to the automotive industry, we are aware of our responsibility to support our customers with innovative, eco-efficient solutions. The biomass balance approach allows us to make our coatings solutions even more sustainable while retaining the same quality. We are delighted that the BMW Group has chosen to play a pioneering role in the automotive industry and that our products play a key part in helping it achieve its ambitious sustainability goals,” said Dr. Markus Kamieth, member of the Board of Executive Directors of BASF SE.

“By reducing our use of fossil raw materials, we can conserve natural resources and lower CO₂ emissions at the same time. To achieve this, we are increasingly relying on sustainability innovations in our supplier network,” said Joachim Post, member of the Board of Management of BMW AG, responsible for Purchasing and Supplier Network. “Innovative paints based on renewable raw materials are an important step in this direction.” The BMW Group produces an average of around 250,000 vehicles every year at its plants in Leipzig and Rosslyn.

In BASF’s biomass balance approach, renewable raw materials like bio-based naphtha and biomethane from organic waste are used as raw materials when manufacturing primary chemical products and are fed into the production Verbund. The proportion of bio-based raw materials is then arithmetically assigned to certain sales products according to a certified method. This attribution model is comparable with the principle of green electricity. An independent certification confirms that BASF has replaced the quantities of fossil resources required for the biomass-balanced product sold with renewable raw materials.

Learn more at www.basf-coatings.com.