Paint & Coatings Industry Top Stories

RSS

Called Advanced Thermal Optics (ATO), the sensing means behind the system enables for highly accurate film thickness to be measured with a non-contact means on cured or uncured organic powder and powder enamel in a way that is extremely adaptable to the production environment.

Why do we continue to have temperature-based process fluctuations when we have a very tightly controlled ambient environment? It turns out that there is not just one single answer. To understand it, we must start by understanding the hierarchy of the various temperatures involved in the painting process.

New waterborne epoxy resins and amine curing agents offer traditional epoxy performance while meeting the market’s desire for higher performance, lower cost and lower solvent content.

For companies looking for high-performance, nontoxic, sustainably produced solvents, a new bio-based solution offers a safer and high-performing alternative to the toxic dipolar aprotic solvents traditionally used in the paint and coatings industry.

WACKER has developed a dispersible polymer powder that allows manufacturers to formulate interior wall paints in powder form. The technology does not require the addition of biocides and offers key advantages when it comes to storing and transporting paints.

Sustainability has been a hot topic for many years, but it seems to be experiencing a resurgence in recent months. PCI recently reached out to Helen Mets, President DSM Resins & Functional Materials, to get her thoughts on the topic.

The transportation industry is among the world’s most competitive industries. This is driven by ever evolving technologies, regulatory policies and consumer expectations.

Recent studies demonstrate that there is a new way to keep the industry just as effective, if not more so, while streamlining the R&D process, while saving both money and materials and better using one's staff. The key is digitizing research and development.

In this experiment, NaSS showed the best performance in terms of mechanical stability, foaming and water absorption. This was attributed to the good polymerizability and surface activity of NaSS. But there is still room for improvement, especially water resistance.

PCI recently met with Bryan Snell, President of Chemours Titanium Technologies, to discuss the current state of the industry, challenges customers face when purchasing TiO2 and a new initiative that Chemours is offering to offset some of these challenges - the Ti-Pure™ Value Stabilization (TVS) customer model.