Today, many coatings producers are increasingly focusing their production towards water-based coatings and are moving away from solvent-based formulations. This is to reduce the VOC content of their formulations, not only to make it friendlier for the end-user, but also to improve the sustainability impact on the environment by reducing their CO2 footprint.
Anti-foam products allow controlling the presence of unwanted foam in different processes, including the manufacture and application of paints. A new range of mineral oil-free anti-foams have been designed, which are not harmful to humans or the environment due to their low or no toxicity, and include enhanced bio-degradability of the raw materials.
What are your powder coating questions and challenges? Joe Powder shares his powder coating knowledge and expertise by answering questions sent in from around the world.
The TiO2 industry is entering a significantly challenging time. The optimism of the first half of 2022 has completely turned in the opposite direction. European demand may be off as much as 40-50% in the second half of 2022 versus the prior year. Numerous operating plants are reported to be curtailing or ceasing production. North America and Latin America were reported to remain strong. These regions are expected to slow in 2023, as recession is likely.
In industrial settings, noxious airborne contaminants from a variety of sources can jeopardize indoor air quality, compromising worker health, productivity, and even regulatory compliance unless the air is sufficiently purified when ventilation alone will not solve the problem. This article explores some solutions.
Thin films as polycrystalline coatings are used in many different application areas. As new applications for thin films emerge and existing applications become mainstream, the technology of deposition is always advancing, and the materials deposited are always being improved. This article provides some example data and analysis showing the performance of one technology for studying polycrystalline coatings.
Elastomeric roof coatings have been used for many years to extend the useful life of several types of roofing substrates. The roof coatings market has seen significant growth, driven by the “cool roof” movement. This article describes the use of very hydrophobic highly branched vinyl esters for high-performance binders for elastomeric coatings.
Read three project case studies to see how an “oven/oxidizer” combination system can be implemented in almost any manufacturing facility that requires both process heating equipment and an air pollution control system.
PCI recently traveled to the Powder Coating Summit in Lombard, Illinois, where low-temperature-cure powder coatings were a hot topic. PCI asked Dr. Robert Duan, ChemQuest president, and his colleague, Kevin Biller, to provide some background on the new trends, developments, and drivers pushing this topic to the forefront of the powder coatings industry.
RSS
