| PCI Magazine

Epoxy Curing Agents

December 11, 2023

This month’s Formulating with Mike column continues the discussion on resins, with a focus on epoxy curing agents. When it comes to great adhesion, chemical resistance, and corrosion resistance, an epoxy is hard to beat. There are different epoxy curing agents, and each one provides different properties that can be suited for a wide variety of end-use applications.

Evaluation of 1,3-Propanediol-Based Polyester and Polyether Polyols in Polyurethane Water Dispersions

for Direct-to-Metal Applications

Sean Gahan Aisa Sendijarevic Ibrahim Sendijarevic

December 11, 2023

No Comments

This study introduces the use of 1,3-Propanediol (1,3-PDO) in polyurethanes as a building block component of polyester and polyether polyols, and as a chain extender. The bio-based coatings prepared in this investigation provided useful physio-mechanical properties, chemical resistance, and water resistance compared to reference commercial petroleum-based two-component PUDs.

A Bio-Based Coalescent for Improving Latex Film Quality and Paint Performance

Álann de O.P. Bragatto Bruno S. Dário Fábio Rosa Fabricio G. Pereira Juliane Pereira Santos Rafael A. Caldato Raquel da Silva Robson André Pagani Thiago C. Magri Frank Bertens

December 11, 2023

2 Comments

The selection of a suitable coalescent involves evaluating the impact on a paint’s performance and sustainable aspects related to durability, bio-based content, and environmental impact. This article shares experiment results of a newly developed bio-based, zero-VOC coalescent for improving latex film formation and paint performance.

Fibrillated Cellulose: A Bio-Based Rheology Modifier That Improves Tensile Strength and Surface Properties of Roof Coatings

Gabriel Ferrante

December 12, 2023

One Comment

Elastomeric roof coatings must show excellent adhesion to the substrate since they can be applied to several types of roofs such as metal, concrete, bitumen, and others. Fibrillated cellulose is a renewable material that delivers multiple functionalities such as rheology to stability and surface properties, as well as supporting a more sustainable lifecycle.

Global Trends Represent Growth and Innovation Opportunities for the Coatings Industry

Victoria Scarborough Ph.D.

December 12, 2023

4 Comments

Commercialization of 3D printing, the increase in popularity of electric vehicles (EVs), and climate change-related challenges are highlighted as three major global trends affecting coatings industry growth and leading innovation efforts.

PPG Reports Third-Quarter Financial Results

October 24, 2023

No Comments

Tim Knavish, PPG Chairman and Chief Executive Officer, commented on the quarter, saying, “ We achieved record third-quarter net sales and adjusted earnings per share aided by the breadth and resiliency of our business portfolio."

image of the INDCO Inc. TL-series tote mixer.

INDCO Releases New Cap-Mounted IBC Tote Mixers

October 23, 2023

No Comments

Available with air or electric operation, from ¾ to 4 HP, models are configured for vigorous agitation in low viscosities or medium agitation for heavier bodied liquids.

Additive for Building Façade Coatings

October 27, 2023

No Comments

The new “Quick-Set property” of TEGO Guard 9000 technology enables high rain resistance just a few minutes after application

QuickShip Program for Dust Collectors

October 31, 2023

No Comments

All three models will be available for non-combustible or combustible dust (Kst) applications, including Protura^® filtration media, and each will include a range of standard features and accessories.

image of Sherwin-Williams' Coated Process Vessel

Sherwin-Williams Releases New Insulative Coating

November 6, 2023

No Comments

The single-component, spray-applied coating system meets OSHA standards for protecting personnel from skin-contact burns on assets operating at temperatures up to 350 °F in one coat.

image of the ROSS 42N-18SS Ribbon Blender

ROSS Releases New Ribbon Blenders

November 7, 2023

No Comments

ROSS Ribbon Blenders handle a wide range of dry materials, from seasonings and beverage mixes to pharmaceuticals, chemicals, plastics and agricultural powders or granules.

EPS Launches New Resin for Pressure-Sensitive Adhesives

November 13, 2023

One Comment

EPS^®(Engineered Polymer Solutions) has launched EPS 2133, an all-acrylic polymer made without APEO surfactants that can be formulated for permanent and removable pressure-sensitive adhesive applications.

Henkel Presents New Additive-Free Sealant

November 14, 2023

One Comment

DAREX WBC 711 was designed specifically for irregular ends of tinplate or aluminum cans lined by shower head or die lining application.

PCI Welcomes New Editorial Advisory Board Members

Kristin Johansson

December 13, 2023

No Comments

PCI’s editors rely on our Editorial Advisory Board (EAB) for assistance with a variety of projects and articles throughout the year. We are pleased to welcome three new coatings industry professionals to our EAB!

ON DEMAND: EPA published a regulation proposal around N-methylpyrrolidone (NMP) in June 2024 to ban or limit NMP in many applications, such as paints and coatings and their removers. N-butylpyrrolidone (NBP) is a powerful and versatile solvent for a variety of industries looking for alternatives to substance of very high concern (SVHC)-listed solvents.

MAX presents a rare opportunity to observe the full scope of manufacturing in one environment. From systems integration and materials handling to automation, quality, safety, and packaging, each discipline is represented through live, operational displays. By experiencing these technologies side by side, as they are on actual production floors, attendees gain a grounded understanding of how manufacturing functions align, overlap, and evolve in practice.

PCI eMagazine

2023 December

Feature Articles

Epoxy Curing Agents

Evaluation of 1,3-Propanediol-Based Polyester and Polyether Polyols in Polyurethane Water Dispersions

A Bio-Based Coalescent for Improving Latex Film Quality and Paint Performance

Fibrillated Cellulose: A Bio-Based Rheology Modifier That Improves Tensile Strength and Surface Properties of Roof Coatings

Global Trends Represent Growth and Innovation Opportunities for the Coatings Industry

Products

PPG Reports Third-Quarter Financial Results

INDCO Releases New Cap-Mounted IBC Tote Mixers

Additive for Building Façade Coatings

QuickShip Program for Dust Collectors

Sherwin-Williams Releases New Insulative Coating

ROSS Releases New Ribbon Blenders

EPS Launches New Resin for Pressure-Sensitive Adhesives

Henkel Presents New Additive-Free Sealant

Editor's Viewpoint

PCI Welcomes New Editorial Advisory Board Members

Keep the info flowing with our eNewsletters!

Get the latest industry updates tailored your way.