Paint and Coatings Additives

RSS

Long-term, broad-spectrum microbial control on painted surfaces can be achieved by careful selection of biocide active agents.

Additives belong to a broad and diffuse category of key components in a coating formulation. The following is a brief description of many coating additives, along with some examples.

Mixture design is a type of DOE that takes advantage of the fact that the proportions of the ingredients of a mixture must add up to 100% to reduce the number of experimental runs required to evaluate the design space.

Read about all of the additives, resins, pigments and equipment technology on display at the ACS

The most effective way to minimize the number of coats needed for an aesthetically pleasing finish is to maximize the applied hiding of the coating.

The VOC results for a given material may vary widely depending upon test methodology.

As power and efficiency of UV/LED devices have improved, they are being used in more processes

This article highlights pertinent current and future issues shaping the coatings industry.

 Smart coatings are an area of development and commercialization that promises to change the expectations of what can be accomplished with coatings. 

 A family of new radiation-curable additives with an improved compatibility in various formulations (solvent-free, solvent and waterborne) and covering a broad slip range has been developed.