Paint & Coatings Industry Top Stories

RSS

Ensuring cleanliness in a paint shop requires a considerably more complex approach than most traditional cleaning methods.

A new and novel material, method and apparatus are presented incorporating cationic UV energy-cured coatings as OPVs upon paper, packaging and/or woven textiles without limitation for cosmetic and/or functional use.

The Corrosion Inspector was designed to produce a fast and objective evaluation of filiform and other corrosion phenomena by digital analysis of coated test plates.

With CUI and corrosion a perennial problem for oil and gas facilities with massive carbon steel structures, utilizing CBPC coatings that can control corrosion for decades and reduce downtime will only help the bottom line.

Successful incorporation of nanomaterials into optical display coatings relies on the core expertise of engineering finely tuned nanoparticles, dispersal in a variety of solvents and scaling these processes to commercial volumes.

Because of the increased accuracy of data, measurements from spectrophotometers can be compared against standards, without the need to conduct parallel tests, effectively saving time and money in the process.

This technique provides the analyst with a "method map" for performing failure, material characterization and deformulation analyses.

This new heating technique is achieved by using a transverse conveyance system in which the car bodies are processed sideways through heating zones, which allows for large convection nozzles to be positioned to direct heated air through the windshield opening of the car into the inner cabin areas as well as directly into the engine compartment areas.

Intelli-ion offers a safer, smarter way to replace traditional toxic chemicals and heavy-metal-containing substitutes. It can be easily incorporated into existing coating products, and could even enhance certain coating properties.

The allnex high-reactive polyester resins give the powder coating industry the ability to formulate products for both indoor and outdoor applications with reduced curing times and/or lower curing temperatures.