The use of ambient-curing silicone resins shows a good alternate option to formulate high heat-resistant coatings compared to the traditional oven-curing or ambient-drying silicone resins.
MFG Chemical's new President and CEO discusses his background and his first several months on the job, as well as the new protocols and changes MFG rolled out since the onset of the COVID-19 pandemic.
To design an emulsion polymer with improved and balanced performance in the interior paint segment, Arkema has identified both polymer and formulation drivers to improve three performance targets
FEVE powder-based topcoats can provide weatherability, corrosion resistance and environmental benefits when used in exterior architectural coatings applications.
A novel powder coating technology using hydroxyalkylamide is pre¬sented in this article for robust manufacturing and processing efficiency using a single resin system.
By incorporating a specialty amine-functional silane oligomer into existing waterborne silane pretreatments, the need for an elevated curing temperature is effectively eliminated, opening the door to this type of environmentally friendly technology to industries and markets that were previously restricted by this elevated-temperature curing requirement.
Whatever your reasons for varying the monomer feed rates, be aware that there may be unintended effects; in addition to the desired outcome, some product properties may also change.
The focus of this article is to understand and evaluate the use of novel acrylated amine oligomers to address curing deficiencies in UV LED-cured systems.
Why did replacing the ester alcohol with a less volatile ester solvent cause the e-coat tank to now be out of specification? What had been wrong with Lindsey’s recommendation?
RSS
